Marmox Thermoblock

Marmox Thermoblock is a block of load-bearing insulation material designed to be placed at the base of a masonry or timber–frame wall to address the thermal bridge. Its thermal conductivity is 0.05W/mK which will result in a significant reduction in y values when used at wall to floor junctions.

Its mean compressive strength is 9N/mm2 allowing it to be used under most load-bearing walls and its characteristic shear strength is 0.18N/mm2. Additionally, because they are impermeable to water they can be used in damp conditions without any loss of their insulating properties. So, not only do Thermoblock thermal insulation products reduce thermal bridging, but they also create a moisture barrier.

• Brick cavity wall

• Solid wall construction

• Brick/block cavity wall

• Brick/timber frame

• Brick/Porotherm cavity wall

• Eliminates cold bridging at floor/wall junction

• Impermeable to water, and can be used in damp conditions without loss of insulation properties

• Suitable to form base layer under walls comprising of brick, block, timber or steel frames

• Mean compressive strength of 9 N/mm²

• Guarantees to provide a significant reduction in the Y value entered into the SAP/ SBEM/ DEAP energy assessment spreadsheet

• BRE Certified

• Material - XPS, Fibreglass, Polymer cement

• Dimensions (mm) - 600×100, 600×140, 600×215

• Thickness (mm) - 65, 100

• Thermal Conductivity (W/mK) - 0.05

• Compressive Strength (N/m2) - 9000 (9)

https://youtu.be/-UfYdyniz2k?si=FtCXAmqj2Adp8xBw